What You Should Know About Having A Serpentine Belt Diagram
A number of late model cars, now use a serpentine belt. The serpentine belt is one belt that drives a number of parts within the engine. Therefore, when you are changing the belt it is important to make a serpentine belt diagram.
By making a serpentine belt diagram, this makes it easier for people to remember where they took the belt off. In most cases, the belt is used to drive the alternator, power steering, A/C, as well as other accessories and parts. In most case, they do not require any type of maintenance. Although they do not require replacement, they still require some type of periodic inspection.
What you should look for while inspecting the serpentine belt?
During the time you are inspecting the serpentine belt, look for any cracks, as well as anything else that may cause the belt to lose its resiliency. One of the main reasons that it is so important to check the belt has to do with the way that the belt snapping can cause damage to the valves. In addition, you will lose the ability to drive the car throughout the time the car is without the serpentine belt
Why should you make a serpentine diagram when you are changing the belt?
One of the main reasons that you should make a serpentine belt diagram has to do with how the belt drives so many important components on the vehicle. More specifically the serpentine belt gives power to things such as your power steering, water pump, air conditioner, alternator, as well as the air pump in the case that your vehicle has one. Therefore, not all of the vehicles are the same.
Generally, most people are capable of replacing the serpentine belt on their own with the use of basic automotive tools. However, without a serpentine belt diagram you risk running into some confusion. Therefore, you want to draw out the basic components within the engine that the belts connected to. From there, you then want to make sure that you draw the belt exactly how it is currently on the vehicle.
By having the serpentine belt diagram, this will make the process of putting the new belt on much easier. This is especially the case, since the belt tends to cross a number of different components on the vehicle.
On the other hand, if you happened to remove the belt without making a diagram, you can find a number of serpentine belt diagrams on the internet for you to refer to. As you may notice, there are several names that are used to refer to a serpentine belt. Some of the common names are a multi-rib, Poly-V, as well as a Micro-V belt. Regardless of the name used, they all mean the same thing and it does not change the way that the belts changed.
What are the different steps to changing a serpentine belt?
In general, the process involved with changing the serpentine belt is one that is easy. In most cases, it should not take you more than a few minutes. This is especially the case when you have a serpentine diagram for your reference. During the time that you are changing the belt, it is always important that you wear protective eye and hand gear.
The next thing that you need to do is lift the hood and then inspect the belt for things such as fraying and other types of things that could make the belt lose strength. Afterward, draw a serpentine belt diagram for reference then loosen the tensioner so that it is easy for you to remove the belt.
After you remove the belt, take the new one and while referring to the serpentine belt diagram put the new one on. The next thing involves tightening the pulley tensioner and then you are done.